Version history for GPU-Z
<<Back to software description
Changes for v2.30.0 - v2.31.0
- Fixed DirectML detection on newer Windows Insider Builds
- Added GPU voltage monitoring for Intel integrated graphics
- AMD Radeon Pro Drivers will now report their version number information
- Added command-line arguments -install and -installSilent
- Switched to InnoSetup based installer
- Improved driver version detection on some systems with NVIDIA GPU
- On Advanced tab, if Vulkan or OpenCL detection fails, report "not supported" instead of "not found"
- GPU-Z startup on slow systems now has longer timeouts to avoid errors
- Added support for NVIDIA GeForce RTX 2070 Super Mobile, RTX 2080 Super Mobile, RTX 2060 Max-Q, RTX 2070 Super Max-Q, RTX 2080 Super Max-Q, RTX 2070 Mobile Refresh, RTX 2060 Mobile Refresh, GTX 1650 Mobile, GTX 1650 Ti Mobile, GeForce MX350, GRID RTX T10 (GeForce Now), Quadro RTX 8000, Tesla P40, Quadro 500M, GeForce GTX 1060 (Microsoft), GeForce GT 610 (GF108), GeForce GT 730M
- Added support for AMD Radeon Pro 580, Radeon Pro V340, Apple 5300M & 5500M
Changes for v2.29.0 - v2.30.0
- Added Advanced tab reporting for Hardware Accelerated GPU Scheduling (Windows 10 20H1)
- Advanced tab now shows WDDM 2.7, Shader Model 6.6, DirectX Mesh Shaders, DirectX Raytracing Tier 1.1
- Worked around Microsoft bug to fix DirectML detection on Windows 10 19041 Insider Build
- Driver registry path for the graphics device is now displayed in Advanced -> General
- Renamed NVIDIA "VDDC" sensor to "GPU Voltage"
- Renamed AMD "GPU only Power Draw" sensor to "GPU Chip Power Draw" to clarify that this is the graphics chip only power draw, not the whole graphics card
- Windows Basic Display Driver will no longer show WHQL/Beta status
- Updated Renoir to be 7 nm
- Added support for AMD Radeon RX 590 GME, Radeon Pro W5500, Radeon Pro V7350x2, FirePro 2260, Radeon Instinct MI25 MxGPU, AMD MxGPU
- Added support for Intel UHD Graphics (i5-10210Y)
- Added support for NVIDIA GTS 450 Rev 2
- Fixed crash during DirectX 12 detection
Changes for v2.28.0 - v2.29.0
Changes for v2.26.0 - v2.27.0
- Added support for AMD Radeon Pro Vega 48, FirePro A300
- Added support for NVIDIA GeForce GTX 1660 Super, GTX 1650 Super, GTX 1650 Max-Q, GeForce 945A, Tesla V100-SXM2-16GB, Tesla P4, Tesla K8
- Advanced Tab now shows PCI bus location of the device
- Fixed crash on very old CPUs due to missing SSE instructions
- Fixed EVGA ICX fan speeds not reported on GeForce 20
- Fixed sensors showing all "0" on some AMD CrossFire setups
- Improved default clock reporting on NVIDIA, even with no driver installed
- Fixed wrong memory clock reported on NVIDIA when two cards with different memory types installed
Changes for v2.6.0 - v2.7.0
- GPU-Z will no longer block Windows shutdown/restart on Fall Creators Update
- Updated NVFlash for newer NVIDIA cards like GTX 1070 Ti
- Fixed reported VRAM size on Vega (now 8192 MB)
- Fixed incorrect labelling of GPU Memory Clock Sensor on NVIDIA
- Fixed Polaris 21 OpenCL and TMU/ROP detection
Changes for v2.2.0 - v2.3.0
- Added support for AMD Radeon RX Vega Series
- Fixed incorrect/missing information AMD Catalyst 17.2.2 and newer
- Fixed GPU & memory activity monitoring on AMD Radeon RX 500 Series
- Fixed crash on startup in rare CrossFire configurations
- Fixed CrossFire detection for slave cards
- Addded VRM efficiency & VDDC/VDDCI power readings for Polaris
- Added support for AMD Radeon WX 7100, WX 3100
- Addded support for NVIDIA Quadro M2200, GTX 1080 Mobile, GeForce MX150
Changes for v1.16.0 - v1.18.0
- Added support for NVIDIA GeForce GTX 1080 Ti, Quadro P4000, P1000, P600, P400
- Added support for AMD Radeon RX 580, RX 570, RX 560, RX 550, HD 6430M
- Added support for Intel HD Graphics 500 (Apollo Lake Pentium N4200)
- Update check will now display the latest version number available
- Fixed error message display during BIOS upload
- Improved tray icon creation code when GPU-Z is launched during Windows startup
- Fixed clocks read as -1 on Pascal cards with overclocking disabled
- Invalid readings are no longer included in sensor average calculation (avoids -1.$ output)
- Addded support to display Boost clocks on Intel
- v1.17.0 (January 31st, 2017)
- Intel GPU codenames now have the CPU name prepended
- All Intel GPUs newer than Sandy Bridge have UEFI marked as available
- Fixed AMD Beema ROP and TMU count, process size 28 nm
- Fixed Bay Trail to be 22 nm, DX11
- Added support for Intel Kaby Lake, Apollo Lake
- Added support for NVIDIA GTX 1050, 1050 Ti Mobile, Quadro 5000, GP104 based GTX 1060, GP104-based Quadro Mobile
Changes for v1.14.0 - v1.16.0
- Fixed Polaris OC reading error, introduced with 1.15.0
- v1.15.0
- Fixed memory clock reading on AMD Fiji cards with Crimson ReLive
- Fixed DDR3 memory detection on Intel Skylake
- Additional fields submitted to GPU Lookup to improve detection
Changes for v1.13.0 - v1.14.0
- Fixed clock reading on AMD cards which do not support Wattman
Changes for v1.9.0 - v1.10.0
- Added support for Radeon RX 470, RX 460
- Added support for NVIDIA GTX Titan X Pascal, GTX 1060 3 GB, GT 740 (GK106), 930M (GM108), 930 MX
- Added support for Intel HD Graphics 510, Iris Graphics 550
- Fixed fan-stop on AMD not getting detected correctly
- Fixed NVIDIA driver version not being read on drivers from Windows Update
- Fixed BIOS saving on AMD RX 470/460
- Fixed crash when lookup button clicked when no card detected
- Name for unknown GPUs on ATI/AMD is now displayed correctly
- Fixed incorrect shader count on Polaris GPUs in ULPS mode
- Fixed GTX 1070/1080 release dates
- Clarified sensor name of Polaris to "GPU 'only' power draw"
- Improved power draw monitoring performance on Polaris
Changes for v0.8.6 - v0.8.7
- Radeon Crimson Driver version is now properly detected
- Fixed 1.55V GPU voltage reading on AMD Fiji when in ULPS
- Fixed Skylake DirectX 12 feature level to correctly show 12_1
- Fixed bluescreen on Intel Cloverview (Atom Z2760)
- Fixed CUDA detection for devices on bus number bigger than 9
- Fixed AMD Beema naming
- Fixed OpenCL driver crash message always blaming ATI
- Some HD 2000 and HD 3000 cards are now correctly recognized as ATI
- Revision ID is now always displayed as two digits
- Fixed shader model still being displayed on older cards
- Fixed millisecond precision in log file timestamps
- Updated Armenian language texts
- Misc Stability fixes
- Added support for NVIDIA GTX 980 8GB (notebook), GTX 965M, GTX 750 (GM206), GT 710 (GK208), Quadro K1200, M5000, M2000M, M1000M, K2200M, GRID K160Q, Tesla K80
- Added support for AMD R9 380X, R7 350, Mullins
- Added support for Intel Skylake Graphics 510, P530, 540
Changes for v0.8.4 - v0.8.5
- Fixed Windows 10 detection
- Fixed CUDA detection in Windows 10
- Added GPU voltage monitoring for AMD Fiji
- Added memory controller load monitoring for AMD Sea Islands, Volcanic Islands, Pirate Islands
- Board Id moved into BIOS version tooltip
- Validation Id now displayed in GPU-Z window title
- Revision Id of recent AMD GPUs will now be displayed
- Added support for NVIDIA GeForce GTX 970M & 980M (GM204-B), GeForce 940M, 930M
- Added support for Intel Atom x7-Z8700, Celeron N3150
- Added support for AMD R9 370, R9 370X, R9 380, R9 390, R9 390X, R9 Fury, A8-7100
Changes for v0.8.2 - v0.8.3
- Added VGA BIOS UEFI support indicator
- Added support for NVIDIA GTX 980 Ti, GTX 965M, GTX 950M, NVS315, GT 750 (GK106)
- Added support for AMD Fiji, Radeon R2/R3 Graphics (Mullins APU)
- Added support for various Intel Broadwell SKUs
- Fixed missing NVIDIA PerfCap sensor in some cases
- Added support for HBM memory
- Fixed GT200B die size
- Fixed some NV42 specs
- Improved OpenCl detection code
Changes for v0.8.1 - v0.8.2
- Added graphics card lookup button
- Added Windows 10 support
- Added support for NVIDIA Titan X
- Added support for AMD R9 255, FirePro W7100, HD 8370D, AMD R9 M280X, R9 M295X
- Added support for NVIDIA GTX 980M, GTX 970M, GTX 965M, GTX 845M, GTX 760 Ti OEM, GTX 660 (960 shaders), GT 705, GT 720, GT 745M, NVS 310, Grid K200
- Added support for Intel Broadwell Graphics
- Improved Intel GMA3600 support
- Improved hardware access stability on AMD Kaveri
- Fixed GTX 970 ROP count
- The driver version readout will now display WHQL status
- Added AMD APU logo and updated other logos
- Added PCI-Express bus usage sensor on NVIDIA
- Added registry key (Force_WDDM_Mem_Sensor=1) to bypass NVIDIA driver memory monitoring and use WDDM monitoring instead
- Web links now opened in default browser
- Fixed NVIDIA BIOS save hanging system on Windows 8 and newer
- Show N/A on Intel IGP memory size
- Fixed GPU-Z icon disappearing on shortcuts
- Fixed blank line between sensor logfile entries
- GPU-Z can now start properly from encrypted system drive
- Displayed Catalyst version only includes version number
- Fixed OpenCL detection on HD 7970M
- CrossFire on AMD cards no longer displayed as ATI CrossFire
- Disabled memory vendor detection on future APUs
Changes for v0.8.0 - v0.8.1
- Added full GeForce GTX 960 support
- Added preliminary NVIDIA GM200 support
- Fixed NVIDIA GM107 ROP count
- Added support for NVIDIA GTX 980M, GTX 970M, GTX 660 (960 shaders), GT 705, GT 720, GT 745M, NVS 310, Grid K200
- Added support for AMD R9 255, FirePro W7100, HD 8370D
- Added preliminary support for Intel Broadwell Graphics
- Fixed sensor window having wrong size when using startup option -tab 2
- Improved memory vendor detection on NVIDIA
- Added PCI-Express bus usage sensor on NVIDIA
- Fixed OpenCL detection for Vesuvius GPU
- Improved detection for future AMD devices
- Disabled memory vendor detection on future APUs
- Added millisecond precision for sensor logging when refresh faster than 1 sec
- Fixed some rare application crashes
Changes for v0.7.9 - v0.8.0
- Added full support for GeForce GTX 970/980
- Fixed BIOS saving on NVIDIA Maxwell GPUs
- Fixed GPU memory usage sensor on Windows 8/8.1
- Fixed system hang when playing video on systems with Hawaii GPU
- Fixed system stuttering on CrossFire with ULPS active
- Added support for AMD Radeon R5 M240, R5 M255, FirePro W2100, W4100, W8100, FireStream 9270, FirePro 2450
- Added support for NVIDIA Quadro K420, K620, K2000D, K2200, K4200, K5200
- Added support for missing Haswell Mobile GPU variant
- Added preliminary support for AMD Topaz GPU
- AMD Tonga: Fix ROP count, shader count, die size, transistors, product name
- Fixed broken HD 7990 detection
- Fixed OpenCL detection on some ATI/AMD cards
- Added support for PerfCap sensor reason: SLI GPUBoost Synchronization
Changes for v0.7.8 - v0.7.9
- Added preliminary support for NVIDIA GM204
- Added preliminary support for AMD Tonga
- Added support for AMD Radeon R9 M275X, FirePro W5100, W9100
- Added support NVIDIA GeForce GTX 780 6 GB, GTX 860M, GTX 780M, GT 830M, GT 740, GT 730, GT 720, Quadro NVS 510, FX 380M, GRID K520, Tesla K40c
- Added release date for R9 290
- More robust PhysX detection
- Fixed fan speed monitoring on some recent AMD cards
- Fix for sensor graph over/underflow
- Performance improvements to sensor graph drawing
- Fix for French translation
Changes for v0.7.7 - v0.7.8
- GPU-Z window can be resized while sensor tab is active
- Fixed incorrect readings on GeForce Tesla cards
- Added support for AMD Radeon R9 295X2, R9 M275, HD 7500G, FirePro W9000
- Added support for NVIDIA GeForce Titan Z, GTX 745, GTX 880M, 870M, 860M, 850M, 775M, NVS 510
- Fixed release date for GTX Titan Black, GTX 780 Ti
Changes for v0.7.6 - v0.7.7
- Sensor refresh rate is adjustable now
- Fixed GM107 TMU & shader count
- Improved NVIDIA Maxwell support
- Added CHiL8214 voltage monitoring for Pitcairn/Curacao cards
- Added support for NVIDIA Tesla K20Xm, GTX 860M
- Added support for AMD Radeon HD 8210
Changes for v0.7.4 - v0.7.5
- Fixed crash/hang on NVIDIA Optimus
- Fixed crash during CUDA detection
- Added voltage monitoring support for new Bonaire/Pitcairn SKUs
- Fixed BIOS reading on AMD Mars and Oland
- Added support for AMD Radeon R7 260, HD 7600A, HD 8850M, HD 8400, HD 8240, HD 7620G
- Added support for NVIDIA GeForce 705A, GTX 645, GTX 650 OEM, Grid K260Q, Quadro K5100M, K6000
- Added support for Intel GMA (Bay Trail), HD 4200
- Windows 8.1 will now be detected properly
- Sensor data in shared memory will now update once per second, as intended
Changes for v0.7.3 - v0.7.4
- Added support for AMD R9 290X, R9 290, R9 270, HD 7310, HD 8280
- Added support for NVIDIA GTX 780 Ti, GT 635, Quadro K3100M
- Added release date for AMD R7 260X, R7 250, R7 240
- Fixed release date for AMD R9 280X
- Fixed die size for AMD Tahiti
- Fixed ROP count on Ivy Bridge and Haswell
- Fixed BIOS saving not working on AMD cards without driver
- Fixed some rare crashes on systems with Intel VGA
- Render Test can be paused by left-clicking into window
Changes for v0.7.2 - v0.7.3
- Added preliminary support for AMD Radeon R7 240, R7 250, R7 260X, R9 270, R9 270X, R9 290, R9 290X
- Added support for AMD Radeon HD 7600G, HD 8250, HD 8330, HD 8470G, HD 8570, HD 8570G, E6460
- Added support for AMD FirePro W7000, W600
- Added support for Intel B43 variant
- Added support for NVIDIA GeForce GT 625, GT 645, GT 755M, GT 745M, GTX 760M, GTX 765M, GTX 770M, Quadro K1100M, K5100M
- Fixed release date for GeForce GT 750M
- Fixed die size for GF117
- Added voltage monitoring support for NVIDIA cards with NCP4206 voltage controller
- Added voltage monitoring support for GeForce GTX 780 with CHL8318
- Fixed crash on AMD HD 7790 while playing video
- Fixed rare issue with fan RPM monitoring when no fan present
- Fixed upgrade installer not working properly when GPU-Z is running
- Sensor history will now be cleared on resume from standby/hibernate
Changes for v0.7.1 - v0.7.2
- Added support for NVIDIA GeForce GTX 760, Tesla K10, GT740M (GK208)
- Added support for AMD Radeon HD 8490, HD 8970M, HD 7400D
- Improved support for Intel Haswell graphics
- Added die size, transistors, release date for Haswell
- Added AMD graphics card logo
- Added translations: Greek, Portuguese (Brazil)
- Updated translation: French
- Fixed rare crash during DirectCompute detectio
Changes for v0.7.0 - v0.7.1
- Added support for NVIDIA GeForce GTX 770, GTX 780, GTX 650 Ti OEM, GT 640 (GK208), GT 630 (GK208), GT 730M, GT 750M, GTX 780M, GRID K1, GRID K2
- Added support for AMD Radeon HD 7730, HD 8310G, HD 6480G, HD 8410G, HD 8450G, HD 8510G, HD 8550G, HD 8610G, HD 8650G
- Fixed BIOS reading on GeForce GTX 650 Ti Boost
- Added experimental sensor readout to show reason for power capping on recent NVIDIA cards
- Fixed clock readings on some older NVIDIA cards
- Improved detection for future NVIDIA cards
Changes for v0.6.9 - v0.7.0
- Added support for AMD Radeon HD 7990, HD 8550M, HD 7340, HD 7290, HD 8670D
- Added support for NVIDIA GeForce GT 740M, 680MX, 675MX, GT218 based 9400 GT
- Fixed TMU count for RV620
- Fixed voltage monitoring on HD 7790
Changes for v0.6.8 - v0.6.9
- Fixed shader count on AMD Radeon HD 7790
- Added support for AMD Radeon HD 8870M
- Added support for NVIDIA GeForce GTX 650 Ti Boost, GT 415, GT 750M
- Changed NVIDIA Kepler DirectX support to 11.0
- Fixed OpenCL detection showing double error message
- Added tooltips for GPU vendor logo, save bios, render test, screenshot button
Changes for v0.6.7 - v0.6.8
- Added support for GeForce GTX Titan, GeForce 505 (GT216), GT 640M, GTX 675MX, Quadro K2000, K3000
- Added support for AMD Radeon HD 7480D, FirePro W8000, V8700, fake HD 6850 (based on HD 6450)
- Fixed GT 620 GPU name
- Fixed release date for Trinity HD 7000G
- Added detection for Intel GMA
- Improved GPU load monitoring on AMD cards
- Fixed two application crashes related to Intel cards
Changes for v0.6.6 - v0.6.7
- Added readout for texture mapping units (TMUs)
- Window position is now restored on startup
- When GPU-Z is minimized, the tray icon tooltip will show some sensor data
- Added support for AMD Tahiti LE, HD 7870M, HD 8000M Series
- Added support for NVIDIA GTX 670MX, GT 645M, 730M, GeForce 505, Tesla K20c, K20m, M2070-Q, M2075, Quadro 410, K600, K4000, K4000M K5000, K5000M 5010M
- Fixed system hang when GPU-Z starts on CrossFire systems (Catalyst driver bug)
- Fixed application crash when scanning for power sensors (NVIDIA driver bug)
- Fixed memory size and GPU temperature reading on AMD Llano Fusion systems
- Added command-line parameter -tab to select active tab on startup
- Fixed OpenCL detection for all AMD Thames based cards (e.g. FirePro m2000)
- Added version number to about dialog
Changes for v0.6.5 - v0.6.6
- Fixed GPU-Z window getting cut off on non-standard DPI settings
- Fixed overclock calculation error on NVIDIA non-Kepler GPUs
- Fixed GPU-Z not starting or crashing the machine on systems with broken HPET implementation
- Fixed SLI not getting detected under Windows XP
- Fixed garbled board name on some older Radeon cards
- Fixed several memory leaks
- L6788A voltage controller on HD 7750 and HD 7770 will now display correct default voltage
- Added support for NVIDIA Tesla M2070
Changes for v0.6.4 - v0.6.5
- Added BIOS save and upload for NVIDIA Kepler GPUs
- Fixed boost clock detection for NVIDIA Kepler
- Fixed realtime memory clock monitoring for NVIDIA Kepler cards without Boost
- Fixed boost clock readout showing for Kepler cards without Boost
- Fixed clock, temperature readings and crashes on AMD Trinity
- Fixed uninstaller icon not displaying properly
- Additional fixes for window getting cut-off on some DPI settings
- Added working ASIC quality readings for NVIDIA Kepler GPUs
- Added support for Intel Haswell Graphics
- Added support for AMD Radeon HD 7450A, HD 7730M, HD 7700M, FirePro M4000, W5000
- Added support for NVIDIA GeForce GTX 650 Ti, GT 635M, GT 620M, GeForce 610M, GT 620 (GF119), GT 640 (GF118), Quadro 7000, Quadro K2000M
- Added release date for GeForce GTX 660 and GTX 650
- Added die size for NV10, NV11, NV15, NV17, NV18, NV25, NV28, NV30, NV31, NV34, NV35, NV36, NV38, NV42, G70M, G71M, G73M
Changes for v0.6.3 - v0.6.4
- Changed sort order of devices to put devices with connected monitor first
- Fixed memory size reading for NVIDIA cards with 4 GB or more
- Fixed AMD Trinity Fusion clock readings
- Added support for NVIDIA GeForce GTX 660 Ti, GTX 660, GTX 650, GT 610, GTX 680M
- Added support for AMD FirePro 2270
- Fixed ROP and TMU count for Intel GMA 3600
- Changed sensor label from "VReg Temperature" to "VRM Temperature"
- Fix for sensors displaying Fahrenheit not being saved properly
- Added VRM temperature monitoring for CHL8228 based cards
- Fix for various crashes
Changes for v0.6.2 - v0.6.3
- Added support for NVIDIA GT 620, GT 630, GT 640, GTX 660, Tesla M2090, Quadro 1100M, Quadro 5000M, NVS 5400M, G610M, GT 620M, GT 630M, GT640M LE, GT 660M
- Added support for AMD Trinity, HD 7570, HD 7670, HD 6610M, HD 7550M, HD 7850M, HD 7520G, HD 7640G
- Added warning when OpenCL detection crashed (usually caused by buggy Intel Ivy Bridge GPU drivers)
- Fixed OpenCL detection for Intel, AMD Cape Verde
- Improved NVIDIA Kepler boost clock detection
- Shader clock readout will now be "N/A" when not available
- Bus interface for Fusion and Intel SB/IB will now be "N/A"
- Fixed crash on ATI related to BIOS reading
- Added GPU Power consumption monitoring for Sandy Bridge & Ivy Bridge
- Added voltage monitoring for HD 7700 Series
- Fixed crashes on Windows 8
- Installer will not be launched when GPU-Z is started using -dump
- Added Icon and Publisher name to Installer
- Sensor log checkbox will uncheck properly
Changes for v0.6.0 - v0.6.2
- Fixed boost clocks being displayed on Fermi
Changes for v0.5.9 - v0.6.0
- Added optional GPU-Z installer which launches when GPU-Z is started for the first time, or can be started manually via the GPU-Z system menu
- Added support for AMD Radeon HD 7870, HD 7850, HD 7670M, FireStream 9370, FirePro V3900
- Added support for NVIDIA GeForce GTX 680, GT 640M, GTX 560 SE, GT 550M, GeForce 510, NVS 2100M
- Fixed clocks not showing correctly on some systems with Catalyst 12.2
- Fixed board id reading on pre-Fermi cards
- Fixed OpenCL detection for ATI Fusion (Sumo & Ontario)
- Fixed GPU-Z window getting cut off at certain DPI settings
Changes for v0.5.8 - v0.5.9
- Added support for AMD Radeon HD 7750 and HD 7770
- Added voltage monitoring for HD 7950 and HD 7970
- Fixed memory size readings for ATI cards with large VRAM
- Improved formula for NVIDIA ASIC Quality reading
- Added explanation text to ASIC quality window
- Fixed bug that caused updater to show up even though no update available, lagging GPU-Z.
- When multi-GPU setup detected, PCIe load test will recommend full screen
- Added board ID to BIOS version readout
- Added option to show sensor reading in GPU-Z title (click the arrow next to the sensor name)
- Refresh sensors in background now defaults to enabled
- Fixed release date for HD 7950
- Added PCI vendor Packard Bell
- Fix for ATI hardware access breaking on Catalyst 12.1
- Added fan RPM monitoring support on some ATI cards
- Added GF108 based GT 520, GTX 555 (non-mobile), GeForce 305M, 610M
Changes for v0.5.7 - v0.5.8
- Added explanation about PCI-Express power savings and 3D render test to accurately measure bus config under load
- Added function to display ASIC quality for Fermi and Southern Islands. (Located in the GPU-Z system menu; click the icon in the top left of the window)
- Fixed crash on older ATI cards
- Added voltage monitoring for HD 7970
- Improved real-time clock monitoring for HD 7970
- Fixed OpenCL detection for AMD Antilles, Whistler, Seymour, Blackcomb
- Improved default clock reading for AMD HD 7970 and Fusion
- Added support for AMD FirePro V7900, HD 6930, HD 7690M, HD 6410D
- Fixed Intel Sandy Bridge IGP to be DirectX 10.1, 32 nm
- Added support for NVIDIA Tesla C2075, GeForce GT 630M
Changes for v0.5.6 - v0.5.7
- Added support for AMD Radeon HD 7970, HD 7350
- Fixed "APIC counter broken" message on AMD Fusion Graphics
- Fixed PCIe 3.0 showing up as 2.0
- Fixed fillrate calculation on Fermi architecture
- Fixed ROP count on GT 420, GT 520, HD 5450, HD 6450
- Fixed random values showing as default clocks on some NVIDIA cards
- Fixed random value showing as shader clock on NVIDIA cards without shader clock
- Added / corrected release dates for HD 3650, FirePro V4800 and V3800
- Added process size, die size, transistor count for Radeon E6760
- Added transistor count for FirePro V4900
- Improved detection for HD 5570, HD 6450A, HD 6470M
Changes for v0.5.5 - v0.5.6
- Removed PowerColor hardware giveaway
- Added support for ATI Radeon HD 6320, ATI FirePro V9800, AMD FirePro V4900
- Added support for GeForce GTX 560 Ti 448 cores, GeForce GTX 460 v2, NVIDIA Quadro NVS 420, NVIDIA Quadro NVS 450, NVIDIA Quadro FX 380 LP
- Fix for incorrect shader reading on Blackcomb
- Added basic detection for NVIDIA Kepler GK107
Changes for v0.5.3 - v0.5.4
- Considerably improved startup time on ATI cards, faster on NVIDIA, too
- Improved rendering on high-DPI screens
- Fixed ROP count reading on AMD Radeon HD 6790, Turks & Whistler
- Fixed sensor count on Caicos, Whistler, Turks
- Fixed OpenCL detection on some NVIDIA drivers
- Memory size reading support for AMD Fusion GPUs
- Added die size and transistor count for GF108, GF114, Turks, Caicos
- Added detection for more Intel Sandy Bridge GPUs
- Added detection for variants of GT 220, GTS 450
- Added detection for faked cards based on GTS 250, 9600 GT, NV41M
- Added detection for GeForce GTX 560 non-Ti, GT 520, GF116 based GTS 450, GT 550M, GeForce 315, GeForce 405, Quadro 2000 & 6000
- Added detection for GeForce GTX 560M, GT 555M, GT 550M, GTX 540M, GT 525M, GT 520M, GTX 415M, GT 410M, Quadro 1000M, NVS 4200M
- Added detection for GT218 based ION 2 / 9300 GS / 8400 GS / 405 / NVS 300
- Added detection for HD 6750, HD 6770, HD 6850M, HD 6970M, HD 6670M, HD 6650M, HD 6330M, FirePro 2260
Changes for v0.5.2 - v0.5.3
- Added support for AMD Radeon HD 6790, FirePro V5800
- Added support for GeForce GT 555M, GTX 540M, G315M, Quadro FX 600, FX 2800M, Quadro 4000
- Fixed GeForce GTX 590 release date
- Added support for voltage controllers VT1556, uP6266, uP6218
- Added VDDCI measurement on CHL8228 based ATI cards
- Added capability to show sensors in TechPowerUp OSD Server
- Fixed several crashes and resource leaks
Changes for v0.5.1 - v0.5.2
- Added support for NVIDIA GT 440, GTX 550, GTX 560, GTX 570, GTX 590
- Added support for AMD HD 6990
- Added detection support for more Sandy Bridge IGPs
- Fixed ROP count on ATI Madison
- Improved OpenCL detection for ATI
- Added CHL8228 voltage controller support for Cayman Pro and XT
- Improved driver based voltage monitoring support for ATI cards
- Added startup parameter /card followed by the adapter index, starts with 1.
- Several crash and stability fixes
Changes for v0.5.0 - v0.5.1
- Added support for NVIDIA GTX 560 Ti, 480M, 485M
- Added transistors and die size for 460M, 445M, 435M
- Added release date for 6800 GT, 6600 GT, 6600, 6200, 8800 GTX, 8800 GTS, 8800 Ultra, 8600 GTS, 8500 GT, 8800 GS, 9600 GSO, 8800 GT, GTS 250, GT 440
- Added preliminary support for AMD Zacate and Ontario APUs
- Found a new way to disable NVIDIA's power limiter
- Added support for GTX 570 and GTX 560 to power limit disable function, the parameter is now called /GTX500OCP
- Fixed crash in sensors panel
- Acer PCI vendor now using a shorter text that fits the field width
- Added CHL8214 & CHL8226 support for AMD Barts and Cayman
- Improved the automatic update check to run completely in the background and only appear when an update is available (manual update check is unchanged)
Changes for v0.4.9 - v0.5.0
- Added full support for Radeon HD 6950 and HD 6970
- Fixed TMU/Texture Fillrate rounding error on NVIDIA cards
- Improved voltage monitoring support for GTX 570
- Workaround for ATI OpenCL driver crashing GPU-Z on systems with NVIDIA cards
- Fixed crash when driver version could not be read
- Fixed crash when splash screen interrupted by message box
Changes for v0.4.8 - v0.4.9
- Added support for GeForce GTX 570, GTX 460 SE
- Added support for PCI-Express 3.0
- Added PowerColor Giveaway
- Added Colorfire PCI vendor ID
- Added detection for AMD Radeon HD 6310, HD 6370
- Fixed BIOS >64k reading on GF110
Changes for v0.4.7 - v0.4.8
- Added support for NVIDIA GeForce GTX 580 and future GF104 variants
- Updated TMU/Texture rate calculation method. Please report any errors in the forums
- Fixed memory clock monitoring on HD 6850, HD 6870
- Fixed label corruption on cards without any shaders
- Fixed rare CrossFire detection bug on ancient ATI drivers
- Added voltage monitoring fallback for ATI cards with unsupported voltage controller
- Updated PCI vendor ID for PowerColor
- Removed MSI giveaway
Changes for v0.4.6 - v0.4.7
- Improved support for AMD Radeon HD 6850 and HD 6870
- Added support for NVIDIA GeForce GT 430, GT 420
- Fixed default clock reading on Fermi architecture cards
- Added voltage controller support for Colorful iGame GTX 460
- Added PCI Vendor detection for Colorful
- Added TMU count and die size for GF106
- Synchronization mutexes are global now
- Improved stability when running multiple instances of GPU-Z / Fixed "the driver has been marked for deletion" error
Changes for v0.4.5 - v0.4.6
- Added MSI hardware giveaway
- Fixed temperature readings getting stuck on ADT7473 sensor (GTX 400 cards)
- Fixed broken BIOS reading on all cards
- General improvements to Intel support, still far from perfect
- Added support for ATI FirePro V8750
- Added support for GeForce GTS 455, GTS 450, GT 440, GTX 430, GTX 420, GT 330, GT218 based ION, GTX 470M, GTX 460M, GTX 445M, GTX 435M, GTX 425M, GTX 420M, GTX 415M, GeForce 310M
Changes for v0.4.4 - v0.4.5
- Fixed shader count on NVIDIA GTX 460, added die size & transistors
- Fixed ROP count on AMD Redwood
- Added support for ATI FirePro V7800, ATI IGP 320M, ATI FireGL X1, ATI HD 4200 variants
- Added launch on Windows startup function accessible via system menu and supporting UAC
- Autoupdater will not check for update when no Internet connection detected
- Fixed browser not starting correctly from autoupdater
- Screenshot detection that promotes GPU-Z's own screenshot upload feature
- Sensor data collection limited to 6 hours of data per sensor (~250 KB)
- Shortened Clevo PCI vendor name
Changes for v0.4.3 - v0.4.4
- Added support for NVIDIA GeForce GTX 460, GT 330, GT 315, GT216 based ION
- Added support for AMD HD 5670 (Juniper), Mobility HD 5430, Mobility 4200, Mobility 4100
- Added PowerColor hardware giveaway
- Added die size measurement for NVIDIA GF100
- Added option to GPU-Z's system menu to show temperatures in °F
- Fix for BIOS reading on ATI
- Fixed decimal points in ADT7473 reading
- Fixed crash on GeForce 8300 IGP
- Added clock monitoring for RS780 variants
- Improved clock monitoring for ATI R6xx architecture
Changes for v0.4.2 - v0.4.3
- Added full voltage controller monitoring for GeForce GTX 480
- Added real-time clock monitoring for GF100
- Added detection for vendor GALAXY
- Complete revamp of voltage controller architecture. Adds voltage monitoring for many ATI & NVIDIA cards and generic monitoring method for NVIDIA cards via driver.
- Added support for >4 GB memory on NVIDIA
- Fixed memory clock reading on some HD 5670 cards
- Fixed thermal sensor count on some ATI Evergreen models
- Fixed incorrect default clock reading on some ATI Evergreen models
- Added detection for NVIDIA GTX 465, GT 320M GT 335M, ION variant, GT 340, Tesla C2050, Tesla M2050, GTX 285M, GT 325M, Quadro FX 880M, Quadro FX 1800M
- Added detection for ATI HD 5570, Mobility 4550, Mobility 5870, HD 4250, HD 4290, FirePro V7750
- Added detection for Intel GMA 3150
- Added fix for ADT7473 coldbug (GTX 480) via commandline parameter /fixcoldbug
- Added OCP adjustment for CHL8266 (GTX 480). Use it via command line parameter /chl8266ocp without parameter to query, with numeric value seperated by space to set. This is a permanent change that will not be reverted by powering down the system.
- Added languages Hungarian and Spanish
- Updated languages French, Italian, Russian
Changes for v0.4.0 - v0.4.2
- Fixed an issue on all NVIDIA cards that would sometimes cause them to lose fan control when GPU-Z is running. Please don't run pre-0.4.2 and 0.4.2 at the same time, this might result in incorrect readings in the 0.4.2 window.
- Fixed system crash on MSI HD 5830 TwinFrozr II
- Validation upload now uses Unicode for entered name
- Reverted memory bandwidth calculation introduced in last version. It introduces too much confusion, we will go with what all companies use in their marketing material, even though we believe it is not correct. Using power of 10 again now, 1 GB/s = 1,000,000,000 Bytes per Second.
Changes for v0.3.9 - v0.4.0
- Added support for NVIDIA GeForce GTX 470 and GTX 480
- Added voltage monitoring for HD 5750, 5830, 5870 Lightning
- Added support for Intel Pineview
- Fixed double memory clock reading on NVIDIA w/ GDDR5 (real clock is now displayed)
- Fixed rounding errors in RV7xx and Evergreen fan monitoring code
- Added tooltip translations for Albanian and Chinese Traditional
- Memory bandwidth calculation uses GB now instead of GiB
- Added new hardware giveaway tab in cooperation with ASUS
Changes for v0.3.8 - v0.3.9
- Added localized tooltips in the languages: AM, AR, BG, CN, DE, FA, FR, IT, PT, RS, RU, TR, UA. Default language is your system language, you can change this setting in the system menu of GPU-Z.
- Added support for ATI HD 5830, HD 5770, HD 5750, HD 5670, HD 5570, HD 5450, HD 4860, HD 4750, Mobility HD 3430, M97, Mobile HD 5850, 5730, 5650, 5470 (Broadway, Madison and Park)
- Added support for NVIDIA GeForce 6200A, GTS 250, 9800S, 205, 310, GT 320, GT 240, GTS 360M, 230M, 330M, 240M, G105M, Quadro NVS170M, G210M, GTS 250M, future MCP, more ION variants.
- Added support for Intel GMA500, Clarkdale, Arrandale
- Added detection for variants of NVIDIA NV41, G94, G98, ATI RV350, RV370, R480, RV515. Most of them used on fake cards relabeled to NVIDIA 9x00 series.
- Improved default clock BIOS parsing on NVIDIA
- Fix for incorrect default clocks on HD 5000 Series
- Fixed incorrect real-time clock monitoring on some HD 5000 cards
- Added more accurate real-time clock monitoring function for NVIDIA
- Improved OpenCL detection on ATI R700, RV790, all HD 5000 cards
- Added temp. monitoring support for some Intel IGPs
- Improvements to CUDA detection
- Removed memory chip input fields from VGA BIOS Upload
Changes for v0.3.7 - v0.3.8
- Added framework for translations in GPU-Z, to do that we need your help. Please go to tpu.me/forums/forumdisplay.php?f=72 to submit contributions in your language
- Added sensors to monitor GPU load percentages on NVIDIA
- Fixed startup on Windows 2000 (DLL not found)
- Improved detection/added sensors for ATI M86
- Fixed several NVAPI crashes
- Fixed crash when PhysX not available
- GPU-Z can now be set in its system menu to be always on top of other windows
Changes for v0.3.6 - v0.3.7
- Added Infotips for sensors
- Fixed crash when ATI ULPS CrossFire enabled
- Added full support for ATI HD 5970 (Hemlock)
- Added full support for NVIDIA GeForce GT 240 (GT215)
- Added "ULPS active" note to CrossFire status when ULPS active
- Fixed overclocks via CCC not showing correctly
Changes for v0.3.5 - v0.3.6
- Added Infotips, they can be turned off in the system menu
- Added preliminary support for ATI Radeon HD 5900 (Hemlock), HD 5600 (Cedar), HD 5300 (Redwood)
- Added full support for HD 5850, HD 5770, HD 5750
- GPU-Z no longer crashes on ATI ULPS enabled CrossFire configurations
- Fillrate Pixel, Fillrate Texel, Memory Bandwidth will now correctly recalculate when clocks change
- Bus Interface, ATI shader count is now periodically refreshed
- Added support for HD 5850 voltages
- Second voltage on HD 5870 correctly named VDDCI
- ATI clock reading code fixed
- Fixed default clock reading on HD 5850
- Added Mutex to avoid collisions on long I2C operations
- Added basic detection for a lot of NVIDIA card fakes (NV41 sold as 9800 GT etc..)
- Added detection for ATI FireGL V7600, M92, RS880
- Added detection for NVIDIA GT 130, 9600 GE, Tesla C1060, G 220, GT 220, NVS 3100, GTS 160 M, NVS 160M, NVS 150M, G105M, GT 240M, G105M, G210M, G310M, ION LE
- Fixed die size and transistor count on G72 M
Changes for v0.3.4 - v0.3.5
- ATI Radeon HD 5870 (Cypress) fully supported (includes voltage monitoring)
- Added or improved support for NVIDIA FX5500, 9400 GT, G73, GTS 240, GT 140, FX 1800, GT 120 (Apple), FX 380, FX 350, GTX 295 Single PCB, Quadro CX, FX 5800, FX 4800, FX 3800, GTX 180M, GTX 260M, FX 2700M, G 110M, GT 120M, GT 220M, FX 1700M, G 105M, MCP79M
- Added or improved support for ATI HD 4730, HD 4650 AGP, M92, M96, M98
- Added clock reading for Intel i910, i915, i945, 946
- Added support for DDR3 detection on G9x
- Added monitoring support for RV7xx based mobile chips
Changes for v0.3.3 - v0.3.4
- Fixed RV740 Bugs: ROP count, shader count, real-time core clock, BIOS dump size
- Fixed number of transistors on RV790
- Fixed BIOS reading on RV790
- NVIDIA driver version is returned correctly on Windows 7
- GPU-Z should work again on Windows 2000 without PSAPI.DLL
- Added voltage reading support for HD 4890
- Fixed default clock reading on ATI cards that have default clock < boot clock
- Fixed GM45 to be 65 nm and DX 10.0
- Added release date for GTX 275
- Fixed GT 130M to be 55 nm and added its release date
Changes for v0.3.2 - v0.3.3
- Added support for RV740 (HD 4750, HD 4770) and RV790 (HD 4890)
- Fixed G98 shader count
- Fixed GT200 process size calculation
- Added support for GTX 275
Changes for v0.3.1 - v0.3.2
- Clock reading on ATI cards fixed
- GT200b is now detected as 55 nm
- Added detection for GeForce GT 120, GT 130, GT 130M, FX 5200, 9400 GT, 9600 GSO 512, FX 2700M, 9500 GS, Quadro FX 540M, Quadro FX 3700M, 9650M GT, Quadro FX 370M, 9400 IGP, 9300 IGP, 8200M G
- Added support for S3 Chrome 500 Series
- Added new ATI logo
- Fixed screen corruption during screenshot of sensors tab
- Added support to show lowest, highest and average reading on sensors tab (click on sensor value to switch)
- Fixed number of texture units on RV730
- Fixed Catalyst version reading
Changes for v0.3.0 - v0.3.1
- Fixed crash on systems without NVAPI (Win 2K, old NV drivers)
- Optimized RV770 BIOS reading code for speed (faster application startup)
- Improved voltage reading code for recent ATI cards
- Added support for fan speed monitoring on ForceWare 180.xx and up
- Added voltage monitoring for NVIDIA (GT200)
- Changed reading method for RV770 sensors, fixes race conditions with other software and on-board fan control
- NVIDIA 9800 GTX+ listed as 55nm now
- Added support for Intel Q43/Q45
- Added support for NVIDIA Quadro FX 4700 X2, GTX 295, GTX 285
- Added preliminary support for NVIDIA GT212, GT214, GT215, GT216, GT218
Changes for v0.2.9 - v0.3.0
- Fixed monitors panel showing up sometimes
- Re-enabled dupecheck for VGA BIOS upload
- Corrected 9800 GTX release date
- Added support for NVIDIA Quadro VX 200
- Fixed voltage readings on HD 4870 and HD 4870 X2
Changes for v0.2.8 - v0.2.9
- Added support for NVIDIA 9800 GT, 9600 GS/GSO, 9300 GS, Quadro FX Go1400, 9800M GTX, 9600M GT, 9650M GT, Quadro FX 770M, 9200M GS, 9300M GS, Quadro NVS 160M, G71 0x2e5
- Added support for ATI HD 4350, HD 4550, HD 4650, HD 4830, HD 4850 X2, RV670 0x9504
- Added support for Intel GM45 variant 0x2a43
- Added support for shader count reading on HD 48xx
- Changed ATI driver function call method. This should result in more accurate readings on X2 cards and non-desktop ATI devices
- Improved VGA BIOS Upload dialog. Drop down lists appropriate for your card will now be fetched from our servers to facilitate the upload process
- Corrected RV610 transistor count
Changes for v0.2.7 - v0.2.8
- Added logging of sensor data to file
- Added option to disable polling for individual sensors
- Added support for AMD RV730
- Added clock reading support for Catalyst 8.9 on RV770 and RV730
- Added support for NVIDIA 9400 GT, 9500 GT, 9600 GS, 9800M GS, 9600M GS, 9300M GS, 9200M GE
- Added support for AMD R580 Stream Processor, RV730 and one M88 variant
- Fixed PCI subvendor ID 1787 to be ATI AIB
- Fixed readings and added monitoring support for ATI M88
- Fixed fan speed readings on ADT7473 sensor
- Added support for ADT7473 sensor chip on ATI
- Added release dates for several NVIDIA mobile GPUs
Changes for v0.2.6 - v0.2.7
- Added display for GPU release date. The data is incomplete, if you have more info please post in the sticky thread in the support forums.
- Added display for transistor count
- Added mouseover readings for sensors graph
- Correctly named the three on-die sensors of RV770 and RV730
- Added support for voltage regulator monitoring on HD 4870 and HD 4870 X2
- RV770 GPU on HD 4870 X2 now called R700
- Added support for reading HD 4870 X2 3D clocks
- Added display of CrossFire Sideport status on HD 4870 X2
- Added more RV730 device IDs
- Added support for GeForce 9800 GT, 9800M GT, 9600M GT, 9700M GS/GT, 9500M G
- Added detection for RS780D
- Fixed incorrectly read ATI OD5 clocks
- Fix for memory clock reading on RV730
- Fixed ROM reading on RV730
- Fixed crash when no supported card detected
- Sensor graph width adjusted when scrollbars visible
Changes for v0.2.5 - v0.2.6
- Added full support for HD 4870 X2
- Added support for reading clocks on newer ATI drivers (R700)
- Fix for realtime clock sensor showing double memory speed on RV770 GDDR5
- Added detection for GeForce 9800 GT, GeForce 9300 GE
- Added support to start GPU-Z minimized (use -minimized)
- Added tray icon when GPU-Z is minimized
- Fixed crash when uploading large BIOS files
- Fixed rare crash that could happen on some NVIDIA cards
- Added detection for Intel Q43. G45 and some variants of G35, G965, GM965
Changes for v0.2.4 - v0.2.5
- Fixed BIOS Reading on HD 4870. Please do not flash non-128K BIOSes to GDDR5 cards
- Fixed GDDR5 bandwidth calculation
- Fixed texture fillrate on RV770 and RV730
- Added three extra on-die temperature sensors to RV770 monitoring
- Removed states.dmp file creation
- Fixed GPU activity readings on RV770
- Changed devices list order to be more intuitive (by bus number now)
- Added Shared Memory support, see the forum for more info
- Fixed more 190°C PCB readings on NVIDIA
- Catalyst Beta versions no longer displayed as version 2.2
- Fixed sensor graph overflow
- Sensor graphs will try to autoscale now
- Fixed RV505 process size
- Fixed memory bus width reading on some ATI RS300
- Fixed rare crash when reading NVIDIA sensors
- Fixed GDDR3 detection for G71
Changes for v0.2.3 - v0.2.4
- Improved RV770 detection
- Fixed another crash related to sensors when switching cards
- More measures to get rid of 190° PCB sensors
- Added preliminary support for RV730
Changes for v0.2.2 - v0.2.3
- Fixed NVIDIA GeForce GTX 260/280 (GT200) support. Everything is working and tested now
- Removed bogus 190°C PCB temp sensor on various NVIDIA cards
- Added fan speed monitoring for NVIDIA
- Fixed crash when switching devices during sensor refresh
- Fixed ROP/Shader count on NVIDIA G72
- Fixed graphs spilling over their client area
- Fixed a number of other rare crashes
- NVIDIA device ID 0x00F3 now correctly recognized as NV43
- Improved crash reporting module
Changes for v0.2.1 - v0.2.2
- Added support for variants of i945G, Q35, G31/G33, G84, G92, G96, GT200, G86M, G84M, C79
- Improved RV770 and GT200 detection code
- Updated NVIDIA temperature reading code
- Fixed updater getting stuck during refresh
- CrossFire on Vista64 now reported with note "unsure", instead of just "unknown"
- Added mini graph to sensors
- Screenshots are uploaded as PNG now
- Added crash report error handler
- Updated G70 number of ROPs
- Added PCI Vendor Point of View
- Improved S3 Chrome 400, S20, S18 and S8 detection
Changes for v0.2.0 - v0.2.1
- Fixed Vista32 / Vista64 detection. It was reversed in 0.2.0.
Changes for v0.1.9 - v0.2.0
- Added support for S3 graphics cards
- Added screenshot upload feature (press F5 or click the camera icon)
- Added NVIDIA GT200 detection
- Updated RV770 detection
- Vista64 is now listed as "Vista64" in the driver version readout
- On Vista64, CrossFire status will be marked as "Unknown" until fix is found
- Added dump to XML. Use command line parameter -dump gpuz.xml
- More robust NVIDIA clock detection
- Fixed G73 fillrate calculation
- Added die size for RV350
- Fixed R680 clock readings
- Fixed R600 ROM reading code
- Fixed sensors not refreshing properly sometimes
- When unknown architecture detected, NVIDIA logo won't be shown anymore
- Fixed random UNICODE characters on some architectures in upload progress
Changes for v0.1.8 - v0.1.9
- Fixed bluescreen when GPU-Z is started
- Fixed splash screen not going away in some cases
- Fixed crash when GPU registers couldn't be accessed (thanks tDJ)
- Fixed shader count for NV44
Changes for v0.1.7 - v0.1.8
- Fixed SLI detection for Vista32 and Vista64
- Added automatic refresh of clocks and multi GPU status
- Added support for NVIDIA Quadro FX Go1400, Quadro NVS 440, GeForce 7350 KE, 7300 GT, 8400 SE, 9800 GX2, 9800 GTX, 9500 GT, 8400, Quadro NVS 140M, 135M, FX 360M, 9300M G, 9500M GS, 8600M GT, 8700M GT, FX 3600M
- Added support for G96
- Added support for ATI FireGL V8600, some RV635 and RV620 variants
- Fixed fan speed monitoring for RV6xx
- Fixed fillrate for 8800 GTS 512
- Fixed some subvendor names
- Fixed shader calculation for M68
- Process size, Die size, DirectX Support will now show "Unknown"
- Fixed crash when no sensors detected
- Fixed NV44 ROP and shader calculation
- Fixed crash when NVIDIA BIOS couldn't be read
- Added Splash screen
Changes for v0.1.6 - v0.1.7
- Corrected several GeForce 9600 GT readings
- Switched GPU and PCB temperature readings on ATI cards when using LM63 sensor
- Some fields on the main screen will now show grey "unknown" instead of "0" when value unknown
- Fixed HD 2900 GT ROP and shader count
- Added HD 3850 AGP detection
- Added 8400 GS detection
- Fixed shader count on modded/unmodded R420 cards
- Added Rage LT Pro detection
- Fixed RS300 vertex shader count
Changes for v0.1.5 - v0.1.6
- Added GPU Sensors tab
- Fixed CrossFire detection under Vista
- Screenshot will now work on Windows 2000 without PSAPI.DLL installed
- Update check default interval is now 1 week
- Added a link to test build forum from validation page
- GPU variant names removed for all ATI and NVIDIA cards. For example "G80 GTX" will be called "G80" from now on
- Added several missing ASICs from families: RV610, RV630, R600
- Added several future ATI ASICs
- Fixed clock detection for some RV6xx ASICs
- Fixed pipeline count on modded RV430 GPUs
- Added ROP/shader readings for RV620, RV635 and future ATI ASICs
- Fixed memory bus width reading for R200 and similar ASICs
- Improved low-level BIOS reading code to work on more GPUs (pre-R500)
- Added detection for ASICs from families: G80, G92, G94, G92 M
- Fixed negative temperature readings in ADT7473 sensor
- Added some missing die sizes for ATI and NVIDIA
- Added bus width reading for NV10
- Fixed bus width reading for NV44
- Fixed ROP/shader counts for NV41, NV42, NV43, G70, G71, G73
- Added detection for i740, GM45
- i865G correctly reports DDR memory now
- Multi GPU dropdown is now a static readout
- Shortened HP PCI vendor name
Changes for v0.1.4 - v0.1.5
- Online BIOS submission dupecheck now actually works
- More changes to G70/G71 ROP/shader detection code (never ending story)
- G71 AGP is now 90nm instead of 110nm
- If default clocks on NVIDIA can not be determined via BIOS, try fallback via driver
- Better driver communication to NVIDIA driver
- Corrected shader detection for softmodded R300, R480 cards
- Known issue: NVIDIA SLI status can not be detected under Vista
Changes for v0.1.3 - v0.1.4
- Added BIOS extraction features
- Added BIOS upload to TechPowerUp VGA BIOS collection
- Fixed high CPU usage after update is aborted
- Added/Improved detection for NV40 0x0040, G80-600, G84, G86, G92, G98
- Changes to shader detection code for NV40, NV41, NV42, NV43, NV44, NV46, NV48, G70, G71, G72, G73
- Added Subvendor ID for Zotac
Changes for v0.1.1 - v0.12
- Added/improved device detection for certain models of: Rage Pro, Rage XL, RageII, RV280, RV515, RV516, R580, R600, Rage Mobility. i810G, i815G, i845G, i865G, i915G, i830GM, i910GL, i915GV, i855GM, i915GM, i945G. G84, G86, G92, G98, C51
- Pressing F5 will now take a .GIF format screenshot
- RV6xx clock reading will now always display high-performance clocks
- Update check won't show up anymore when "Never" is selected
- Update check can be aborted at any time during execution
- Added mouse over tooltips for text boxes that could have too long text
- Added experimental memory type and bus width detection for Intel integrated
- Added PCI vendor PNY
- Intel driver version is now properly detected on all operating systems
- Added N/A to ATI GPU revision and other similar fields
- Memory bus width detection improved for RV530, RV535, RV560, RV570, R520, R580, M56, M58, M66, M68
- Added option to receive E-Mail with validation ID after submission
- Fixed Catalyst version detection on XP64
- Added detection for AGP cards running in PCI mode
- Age setting now properly reflects author's age (Happy Birthday!)
Changes for v0.1.0 - v0.1.1
- Fixed shader count on RV670
- Fixed Shader Model info on some ATI cards
- Some ATI cards no longer report memory type DDRX
- Added basic i815G info
- Fixed G71 / G70 AGP misspelling
Changes for v0.0.9 - v0.1.0
- Added preliminary support for Intel
- Added Shader Model readout
- Fixed ATI RV6xx clocks reading
- Fixed report submission on Windows XP 64-bit
- When submitting a bug report, a problem description is required
- Improved ATI BIOS reading code
- Shortened BIOS string to fix window in some instances
- Added end ellipses to certain display fields
- Fixed crashes when using NVAPI
- Fixed lost handles when using NVAPI
- Fixed memory type detection for G84, G86, G92
- Improved NVIDIA BIOS reading code
- Subvendor BFG Tech now correctly named
- Numerous adjustments to pipe/shader configurations on both ATI and NVIDIA
