AfterDawn | News | Guides | Software downloads | Tech Support | Forums | HIGH.FI
AfterDawn
AfterDawn > Software downloads > Network > Miscellaneous network tools > NAS4Free (32-bit embedded) > Version history

Version history for NAS4Free (32-bit embedded)

<<Back to software description

Changes for v10.1.0.2.1454 Beta - v10.1.0.2.1557 Beta

  • Changes:
  • Upgrade to FreeBSD 10.1 RELEASE p10.
  • Add Home, Insert, Delete, End, Page Up/Down, ctrl left/right keys to console.
  • Add Daap/Firefly advanced options.
  • Add aio_pthread streams_xattr acl_xattr.
  • Add zfsacl default setting.
  • Add inherit acls on SMB share.
  • Increase upload size in Webserver service up to 16GiB. (websrv_maxrequestsize)
  • Support aclinherit/aclmode ZFS properties.
  • Use crypt password instead of md5 value.
  • Upgrade tzdata to 2015d.
  • Upgrade mDNSResponder to 567.
  • Upgrade msmtp to 1.6.2.
  • Upgrade tmux to 2.0.
  • Upgrade php to 5.6.9.
  • Upgrade bash 4.3 to patch 39.
  • Upgrade samba to 4.1.18.
  • Upgrade nut to 2.7.3.
  • Upgrade jQuery to 1.11.3.
  • Fixes:
  • AFP share is not shown in Time Machine.
  • Translation to filechooser.
  • missing translation in OPT/LAN interface.
  • broken extension menu in filemanager.
  • AFP share is not shown in Time Machine.
  • missing libftdi in lcdproc.


Changes for v9.3.0.2.1391 - v10.1.0.2.1454 Beta

  • Changes:
  • Upgrade to FreeBSD 10.1 RELEASE p9.
  • Add Home, Insert, Delete, End, Page Up/Down keys to shell.
  • Upgrade php to 5.6.8.
  • Upgrade tzdata to 2015d.
  • Upgrade mDNSResponder to 567.
  • Upgrade msmtp to 1.6.2.
  • Fixes:
  • AFP share is not shown in Time Machine.


Changes for v9.3.0.2.1480 - v9.3.0.2.1556

  • Changes:
  • Upgrade to FreeBSD 9.3 RELEASE p14.
  • Upgrade to Samba4.1 and add SMB3 in WebGUI.
  • Convert to pkgng.
  • Ability to backup and restore the encrypted configuration.
  • Installation of system with GPT partition. (experimental)
  • Improved WebGUI under PHP 5.6.
  • Improved WebGUI with Chrome.
  • Improved config restore verbose output.
  • Improved ZFS pool usage/tool and import ZFS disks.
  • Improved ZFS pool import on embedded.
  • Improved HAST switch with net.inet.carp.preempt.
  • Improved PHP session handle.
  • Improved swap setting.
  • Replaced /dev/md0 with xmd using LZ4 compression.
  • Replaced the server certificate with 2048bits key and sha256 signature.
  • Change iperf2.x for iperf3.
  • Changed samba reload when changing the shares. (it takes few secs.)
  • Changed rootfs layout. (2GB USB/CF is required. Full is 4GB or more.)
  • Changed image files to use XZ.
  • Changed net.inet.tcp.delayed_ack to 1.
  • Changed boot with advskew=240 on master node. ("Switch VIP to MASTER" button will change the value)
  • Changed default Map to guest in CIFS/SMB is enabled.
  • Changed SMB send/recv buffer to 128480.
  • Drop SSLv3 support. (HTTPS must use TLS)
  • Drop LiveCD mode support with less than 2GB memory. (install/upgrade only). Supported minimum spec except LiveCD is 512MB memory + 512MB swap device or partition. 1024MB swap device or partition is recommended. File based swap and ZFS volume swap is not recommended.
  • Add ext2/ext3/ext4 detection when importing disk.
  • Add NFS v4 support.
  • Add tcpdump.
  • Add hostapd support. (wireless AP mode)
  • Add WLAN virtual interface used for wireless device. (OPT only at this time)
  • Add WebGUI access restriction.
  • Add NFS support in HAST service.
  • Add default swap of 512MB for LiveUSB and before user configuration.
  • Adjust number of Status|Processes.
  • Add MBR partition to LiveUSB.
  • Add log/mirrored log support in Disks|ZFS|Pools|Tools.
  • Add expires HTTP header. (some js must be force reloaded.)
  • Add 10.1 bge driver & NAS4Free bge wol patch.
  • Increase http upload size to 512MB.
  • Remove last slash of the path added by filechooser.
  • Add wait_on and spindown.
  • Upgrade e2fsprogs to 1.42.12.
  • Upgrade transmission to 2.84.
  • Upgrade isboot to 0.2.8.
  • Upgrade istgt to 20141125.
  • Upgrade smartmontools 6.3
  • Upgrade xmlstarlet to 1.6.1.
  • Upgrade mDNSResponder to 561.1.1.
  • Upgrade xmd to 0.4.4.
  • Upgrade bash 4.3 to patch 33.
  • Upgrade unison to 2.48.3.
  • Upgrade netatalk to 3.1.7.
  • Upgrade iperf3 to 3.0.11.
  • Upgrade inadyn-mt to 02.24.44.
  • Upgrade samba to 4.1.17.
  • Upgrade sipcalc to 1.1.6.
  • Upgrade nano to 2.4.1.
  • Upgrade rsync to 3.1.1.
  • Upgrade tzdata to 2015d.
  • Upgrade mDNSResponder to 567.
  • Upgrade msmtp to 1.6.2.
  • Upgrade php to 5.6.8.
  • Fixes:
  • Newly created AFP share is not shown in Time Machine.
  • Pool state on index.php is not a live state.
  • Can not mount(readonly) ext2/ext3/ext4 on GPT.
  • Remove ZFS pool cache in ZFS pool tools and sync.
  • FAT/NTFS mount does not use access restriction.
  • Broken Wireless support.
  • ZFS pool cache is not removed when deleting or reseting to factory default.
  • Missing /etc/uams/uams_randnum.so
  • Missing nutdrv_atcl_usb nut driver.
  • Never reject SMB3 and sendfile combination.
  • Failed to mount NTFS with read-only.
  • Missing mount_fusefs in /usr/local/sbin.
  • Missing usb device configuration file.
  • Missing default pkg repository.
  • mount_ntfs is not installed to /sbin.
  • Wrong variable in HAST script.
  • /boot/kernel/fuse.ko is missing.
  • /etc/platform is broken on full installation.
  • Some DHCP setting of WebGUI does not work.
  • xmlrpc is broken.
  • Missing GPT partition in Disks|ZFS|Pools|Tools.
  • Switching DHCP and static IP cause unexpected behavior.
  • Some drives can't get disk model/description.
  • The text on graph is not sized on Chrome.
  • Firmware page show incorrectly.
  • ntfs-3g is broken.
  • Form size is too small on Chrome.
  • HAST device is not imported by import disks.
  • Stop flooding "Unknown USB device" to syslog.


Changes for v9.3.0.2.1391 - v9.3.0.2.1480

  • Changes:
  • Upgrade to FreeBSD 9.3 RELEASE p13.
  • Upgrade to Samba4.1 and add SMB3 in WebGUI.
  • Convert to pkgng.
  • Ability to backup and restore the encrypted configuration.
  • Installation of system with GPT partition. (experimental)
  • Improved WebGUI under PHP 5.6.
  • Improved WebGUI with Chrome.
  • Improved config restore verbose output.
  • Improved ZFS pool usage/tool and import ZFS disks.
  • Improved ZFS pool import on embedded.
  • Improved HAST switch with net.inet.carp.preempt.
  • Improved PHP session handle.
  • Improved swap setting.
  • Replaced /dev/md0 with xmd using LZ4 compression.
  • Replaced the server certificate with 2048bits key and sha256 signature.
  • Change iperf2.x for iperf3.
  • Changed samba reload when changing the shares. (it takes few secs.)
  • Changed rootfs layout. (2GB USB/CF is required. Full is 4GB or more.)
  • Changed image files to use XZ.
  • Changed net.inet.tcp.delayed_ack to 1.
  • Changed boot with advskew=240 on master node. ("Switch VIP to MASTER" button will change the value)
  • Changed default Map to guest in CIFS/SMB is enabled.
  • Changed SMB send/recv buffer to 128480.
  • Drop SSLv3 support. (HTTPS must use TLS)
  • Drop LiveCD mode support with less than 2GB memory. (install/upgrade only)
  • Supported minimum spec except LiveCD is 512MB memory + 512MB swap device or partition.
  • 1024MB swap device or partition is recommended.
  • File based swap and ZFS volume swap is not recommended.
  • Add ext2/ext3/ext4 detection when importing disk.
  • Add NFS v4 support.
  • Add tcpdump.
  • Add hostapd support. (wireless AP mode)
  • Add WLAN virtual interface used for wireless device. (OPT only at this time)
  • Add WebGUI access restriction.
  • Add NFS support in HAST service.
  • Add default swap of 512MB for LiveUSB and before user configuration.
  • Adjust number of Status|Processes.
  • Add MBR partition to LiveUSB.
  • Add log/mirrored log support in Disks|ZFS|Pools|Tools.
  • Add expires HTTP header. (some js must be force reloaded.)
  • Add 10.1 bge driver & NAS4Free bge wol patch.
  • Increase http upload size to 512MB.
  • Remove last slash of the path added by filechooser.
  • Add wait_on and spindown.
  • Upgrade e2fsprogs to 1.42.12.
  • Upgrade transmission to 2.84.
  • Upgrade isboot to 0.2.8.
  • Upgrade istgt to 20141125.
  • Upgrade smartmontools 6.3
  • Upgrade xmlstarlet to 1.6.1.
  • Upgrade mDNSResponder to 561.1.1.
  • Upgrade xmd to 0.4.4.
  • Upgrade bash 4.3 to patch 33.
  • Upgrade unison to 2.48.3.
  • Upgrade netatalk to 3.1.7.
  • Upgrade iperf3 to 3.0.11.
  • Upgrade inadyn-mt to 02.24.44.
  • Upgrade samba to 4.1.17.
  • Upgrade sipcalc to 1.1.6.
  • Upgrade nano to 2.4.1.
  • Upgrade rsync to 3.1.1.
  • Upgrade php to 5.6.8.
  • Upgrade tzdata to 2015d.
  • Upgrade mDNSResponder to 567.
  • Upgrade msmtp to 1.6.2.
  • Fixes:
  • Newly created AFP share is not shown in Time Machine.
  • Pool state on index.php is not a live state.
  • Can not mount(readonly) ext2/ext3/ext4 on GPT.
  • Remove ZFS pool cache in ZFS pool tools and sync.
  • FAT/NTFS mount does not use access restriction.
  • Broken Wireless support.
  • ZFS pool cache is not removed when deleting or reseting to factory default.
  • Missing /etc/uams/uams_randnum.so
  • Missing nutdrv_atcl_usb nut driver.
  • Never reject SMB3 and sendfile combination.
  • Failed to mount NTFS with read-only.
  • Missing mount_fusefs in /usr/local/sbin.
  • Missing usb device configuration file.
  • Missing default pkg repository.
  • mount_ntfs is not installed to /sbin.
  • Wrong variable in HAST script.
  • /boot/kernel/fuse.ko is missing.
  • /etc/platform is broken on full installation.
  • Some DHCP setting of WebGUI does not work.
  • xmlrpc is broken.
  • Missing GPT partition in Disks|ZFS|Pools|Tools.
  • Switching DHCP and static IP cause unexpected behavior.
  • Some drives can't get disk model/description.
  • The text on graph is not sized on Chrome.
  • Firmware page show incorrectly.
  • ntfs-3g is broken.
  • Form size is too small on Chrome.
  • HAST device is not imported by import disks.
  • Stop flooding "Unknown USB device" to syslog.


Changes for v9.3.0.2.1349 - v9.3.0.2.1391

  • Changes:
  • Upgrade to FreeBSD 9.3 RELEASE p13.
  • Upgrade to Samba4.1.x now supports SMB3 in WebGUI.
  • Convert to pkgng.
  • Ability to backup and restore the encrypted configuration.
  • Installation of system with GPT partition. (experimental)
  • Improved WebGUI under PHP 5.6.
  • Improved WebGUI with Chrome.
  • Improved config restore verbose output.
  • Improved ZFS pool usage/tool and import ZFS disks.
  • Improved ZFS pool import on embedded.
  • Improved HAST switch with net.inet.carp.preempt.
  • Improved PHP session handle.
  • Improved swap setting.
  • Replaced /dev/md0 with xmd using LZ4 compression.
  • Replaced the server certificate with 2048bits key and sha256 signature.
  • Change iperf2.x for iperf3. (iperf commands changed! now use iperf3 command)
  • Changed samba reload when changing the shares. (it takes few secs.)
  • Changed rootfs layout. (2GB USB/CF is required. Full is 4GB or more.)
  • Changed image files to use XZ.
  • Drop SSLv3 support. (HTTPS must use TLS)
  • Drop LiveCD mode support with less than 2GB memory. (install/upgrade only). Supported minimum spec except LiveCD is 512MB memory + 512MB swap device or partition. 1024MB swap device or partition is recommended. File based swap and ZFS volume swap is not recommended.
  • Add ext2/ext3/ext4 detection when importing disk.
  • Add NFS v4 support.
  • Add tcpdump.
  • Add hostapd support. (wireless AP mode)
  • Add WLAN virtual interface used for wireless device. (OPT only at this time)
  • Add WebGUI access restriction.
  • Add NFS support in HAST service.
  • Add default swap of 512MB for LiveUSB and before user configuration.
  • Adjust number of Status|Processes.
  • Add MBR partition to LiveUSB.
  • Add log/mirrored log support in Disks|ZFS|Pools|Tools.
  • Add expires HTTP header. (some js must be force reloaded.)
  • Add 10.1 bge driver & NAS4Free bge wol patch.
  • Increase http upload size to 512MB.
  • Remove last slash of the path added by filechooser.
  • Add wait_on and spindown.
  • Upgrade e2fsprogs to 1.42.12.
  • Upgrade transmission to 2.84.
  • Upgrade isboot to 0.2.8.
  • Upgrade istgt to 20141125.
  • Upgrade smartmontools 6.3
  • Upgrade xmlstarlet to 1.6.1.
  • Upgrade mDNSResponder to 561.1.1.
  • Upgrade xmd to 0.4.2.
  • Upgrade bash 4.3 to patch 33.
  • Upgrade unison to 2.48.3.
  • Upgrade netatalk to 3.1.7.
  • Upgrade iperf3 to 3.0.11.
  • Upgrade samba to 4.1.17.
  • Upgrade zoneinfo to 2015b.
  • Upgrade php to 5.6.7.
  • Upgrade nano to 2.4.0.
  • Fixes:
  • Can not mount(readonly) ext2/ext3/ext4 on GPT.
  • Remove ZFS pool cache in ZFS pool tools and sync.
  • FAT/NTFS mount does not use access restriction.
  • Broken Wireless support.
  • ZFS pool cache is not removed when deleting or reseting to factory default.
  • Missing /etc/uams/uams_randnum.so
  • Missing nutdrv_atcl_usb nut driver.
  • Never reject SMB3 and sendfile combination.
  • Failed to mount NTFS with read-only.
  • Missing mount_fusefs in /usr/local/sbin.
  • Missing usb device configuration file.
  • Missing default pkg repository.
  • mount_ntfs is not installed to /sbin.
  • Wrong variable in HAST script.
  • /boot/kernel/fuse.ko is missing.
  • /etc/platform is broken on full installation.
  • Some DHCP setting of WebGUI does not work.
  • xmlrpc is broken.
  • Missing GPT partition in Disks|ZFS|Pools|Tools.
  • Switching DHCP and static IP cause unexpected behavior.
  • Some drives can't get disk model/description.
  • The text on graph is not sized on Chrome.
  • Firmware page show incorrectly.
  • ntfs-3g is broken.
  • Form size is too small on Chrome.
  • HAST device is not imported by import disks.
  • Stop flooding "Unknown USB device" to syslog.


<<Back to software description

Top downloads

Latest updates

Help us

Sections:

Follow us:

© 1999-2024 AfterDawn Oy. All rights reserved
Back to Top ⇧
AfterDawn is powered by Powered by UpCloud